Szybka wysyłka do pełnej wymiany czujników bezpieczeństwa

dom / wszystko / Laser Distance Displacement Sensor /

Safely Handling PCB Boards with Robotics

Safely Handling PCB Boards with Robotics

2025/1/11

Safely Handling PCB Boards with Robotics

Industrial robots have become indispensable in PCB (printed circuit board) handling, where precision and efficiency are paramount. Leveraging DADISICK's GFL-Z series laser displacement sensors, this solution offers advanced positioning, posture detection, and real-time feedback, setting a new standard in reliable PCB handling processes.
Solution for Safe Robotic Handling of PCB Boards

High-Precision Positioning

Initial Positioning

Before the robotic arm picks up the PCB, the GFL-Z series laser displacement sensor accurately measures the PCB’s position on the surface, identifying any deviation relative to the robot’s pre-set pickup location. Based on the triangulation measurement principle, the sensor achieves a repeatability accuracy of 10 µm within a 25 to 35 mm measurement range. By detecting the PCB’s coordinate deviation in the X-Y plane, the sensor provides precise positioning data, ensuring accurate grasping actions and preventing PCB damage caused by incorrect positioning.

Placement Positioning

When the robotic arm transports the PCB to the target location, the laser displacement sensor plays a critical role again, detecting the precise coordinates of the target location. This ensures the PCB is placed at the predefined position with micron-level precision. Such accuracy is essential for subsequent processing steps (e.g., component insertion, soldering), enhancing production efficiency and significantly reducing defects caused by positional errors.

Posture and Deformation Detection of PCBs

Posture Detection

During transportation, the PCB may experience tilting or rotational changes. The laser displacement sensor detects posture changes by measuring height differences at various points on the PCB. For instance, if the sensor identifies that one corner is significantly lower than the others, it can infer that the PCB is tilted. The robotic arm can then adjust its grasping and placement actions accordingly, ensuring proper posture during handling.

Deformation Detection

Due to material properties or external factors (e.g., temperature, pressure), the PCB may deform. The GFL-Z series laser displacement sensor scans the PCB surface and compares the data with standard models to quickly detect deformations. If deformation is detected, the system can take actions such as halting transportation, issuing alerts, or adjusting handling strategies to prevent faults in subsequent processes caused by deformation.

Real-Time Feedback and Path Planning Adjustment

Real-Time Feedback

During the handling process, the laser displacement sensor continuously monitors the relative position of the PCB and its surrounding environment. For example, if the sensor detects a few millimeters of displacement along the Z-axis, the control system can immediately adjust the robotic arm’s movement parameters to maintain positional accuracy throughout transportation.

Path Planning Adjustment

Based on real-time data from the sensor, the robotic arm’s path planning system dynamically adjusts the transportation route. If obstacles are detected along the predefined path or the PCB’s position deviates, the system recalculates a safe and efficient route. This enhances the robotic arm’s flexibility and adaptability in complex production environments.

Recommended Laser Displacement Sensor

Laser Displacement Sensor
The GFL-Z Series displacement sensor is a specialized solution for high-precision measurement tasks, offering versatile applications across various industries. With a measurement range of 25 mm to 35 mm, the GFL-Z Series provides a precision of up to 10 µm. The sensor supports simultaneous reading from up to 12 units, enabling advanced data processing and analysis. It offers features such as:

▪️Statistical Analysis: Max, Min, and Average values for a single data acquisition session.
▪️Waveform Display: Real-time visual display of measurement data, with the option to export to Excel for further analysis.
▪️Differential Calculation: Supports the calculation of differences between two sensors for enhanced accuracy.
▪️User-Defined Limits: Customizable upper and lower limits, with the option to reset the display.

Output Options:
▪️RS485 (MODBUS Protocol)
▪️Analog Output: 0-5V / 4-20mA
▪️Discrete Output (NPN): Customizable to PNP if required.

Possible Solutions

Laser distance displacement sensor | COMS Laser Sensor | DADISICK
Response time: up to 1.5ms Repetitive accuracy: up to 10µm
Laser displacement | Laser Distance Sensors | DADISICK
Response time: up to 1.0ms Repetitive accuracy: up to 2µm
CSB12-120-J55-E2-V1 | Ultrasonic Sensor Manufacturers | DADISICK
Detection range: 20-120mm Material: copper nickel plating Connection type: 4-pin M12 connector Output method: 1 NPN switch output, NO/NC
Universal Square Photoelectric Sensor GF43 Series
Detection distance: 30-150mm, 2M, 10M Power supply voltage: DC12-24V No-load current:9mA , 9mA, Reflection 11mA, reception 9mA Connection method:Wire lead type (standard wire length 2m)

Firma DADISICK zawsze była zaangażowana w wysokiej klasy produkty czujników bezpieczeństwa, skupiając się na badaniach i rozwoju technologicznym oraz innowacjach produktowych. Nasze produkty są szeroko stosowane w takich branżach, jak urządzenia automatyki, produkcja mechaniczna, produkcja samochodów i produkcja elektroniki, pomagając zmniejszyć liczbę wypadków przemysłowych i zapewnić bezpieczeństwo pracowników. Nadal wprowadzamy nowe produkty, które spełniają wymagania rynku, zapewniając wsparcie dla produkcji bezpieczeństwa przedsiębiorstwa.

*Usługi wymiany: Na bardzo konkurencyjnym rynku firmy muszą nieustannie ulepszać swoje produkty, aby utrzymać udział w rynku. Oferujemy usługi wymiany czujników bezpieczeństwa.

*Poprawa lub dostosowanie linii produktów: Kiedy firma wchodzi na nowe rynki lub zmienia kierunek, może potrzebować udoskonalić swoją linię produktów. Oferujemy produkty czujników bezpieczeństwa i wsparcie techniczne dla tej zmiany.

*Przemysł automatyki Monitorowanie stanu pracy urządzeń, natychmiastowe zatrzymywanie lub dostosowywanie działań maszyn w celu zapewnienia bezpieczeństwa procesu produkcyjnego.

*Produkcja mechaniczna Monitorowanie mechanicznych elementów ruchomych, zapobieganie potencjalnym zagrożeniom, dbanie o bezpieczeństwo pracowników i płynne działanie linii produkcyjnej.

*Dział Bezpieczeństwa Produkcji Motoryzacyjnej monitoruje procesy wysokiego ryzyka na liniach montażowych pojazdów, poprawia bezpieczeństwo pracowników i wydajność produkcji.

*Przemysł chemiczny Monitorowanie w czasie rzeczywistym środowiska produkcyjnego w celu zapewnienia bezpieczeństwa podczas obchodzenia się z substancjami toksycznymi i niebezpiecznymi.

*Przemysł spożywczy i napojów Monitorowanie pracy urządzeń na linii produkcyjnej, zapobieganie zanieczyszczeniom i marnotrawieniu żywności.

*Logistyka i magazynowanie wykorzystywane do nawigacji AGV i omijania przeszkód, zapewniają bezpieczny transport towarów.

*W przemyśle drzewnym, tekstylnym, papierniczym, drukarskim, gumowym i tworzyw sztucznych czujniki bezpieczeństwa służą do monitorowania różnych procesów produkcyjnych, zapewniając bezpieczeństwo i wydajność.