Przedstawione tutaj produkty stanowią część linii produktów marki DADISICK, która jest niezależnie opracowywana, produkowana i sprzedawana.
Zapewniamy stabilne produkty wysokiej jakości i zapewniamy szybką dostawę.
Katalog produktów | GFK & GFW Series |
---|---|
marki | DADISICK |
Specyfikacja produktu | GFK & GFW Series |
Digit: | Thousandths/Ten thousandths |
Resolution: | 0.1μm |
Repeat accuracy: | < 1μm |
Supply voltage: | DC12V |
Operating temperature: | -10~60°C |
Product size: | 90x23x21 mm |
Wire length: | 2m+1m(output line 1m) |
Installation method: | Standard DIN rail |
Zaktualizowano | 2025/3/12 |
Contact Digital Displacement Sensor Basic information
|
||
Product type | GFK | GFW |
Digit | Thousandths | Ten thousandths |
Can be matched with sensor range | Rebound type 2mm/ 5mm/10mm/air push type 10mm, reed type, etc. | |
Resolution | 0.1μm | |
Repeat accuracy | < 1μm | |
Supply voltage | DC12V | |
Operating temperature | -10~60°C | |
Storage temperature | -20~70°C | |
Product size | 90x23x21 mm | |
Wire length | 2m+1m(output line 1m) | |
Installation method | Standard DIN rail | |
Remarks | If you need other range sensors, please communicate with sales in advance |
Main Technical Parameters
|
|||
Range | 10mm(±5mm) | Working temperature | -10~80°C |
Coil type | Full bridge | Protection level |
IP65 |
Drive mode | Air push | Case hardness | HR15N80 |
Excitation frequency | 13kHz | Fatigue life | 15 million times |
Resolution | Minimum 0.1μm | Probe | Standard probe (optional) |
Repeat accuracy | 1μm | Guide device | Ball bearing |
Linearity | ±0.4% F.S | Case material | Stainless steel |
Temperature coefficient | 0.01% F.S./℃ | Air pressure | 0.05MPa (recommended value) |
Measurement force | min 0.2N | Line length | 2m (customizable) |